jablotron 100+, Manual

Page: 21 / 26

EN
41
3. BLOCKING/DISABLING IN THE SYSTEM
3.1. BLOCKING USERS
Any user can be temporarily blocked (e.g. when a user loses a card/tag or his access code is
revealed). When user’s access is blocked their ID code or card/tag will no longer be accepted by
the system. The users will also not receive any SMS alerts or voice reports to their phone.
Only the system administrator or service technician can block a user. One method of taking away
access rights is by choosing Settings / Users / User / Bypass and selecting “Yes” on the LCD
keypad. Another option is to locally or remotely block a user through the J-Link software by clicking
on the user in the Settings / Users / User blocking column.
A blocked (disabled) user will be marked with a red circle until the blocking is cancelled.
3.2. BLOCKING DETECTORS
A detector can be temporarily blocked in a similar way a user can be disabled. A detector is
blocked when its activation is temporarily not desirable (for example a motion detector in a room
with a pet or disable a siren sounding). The system still performs diagnostics of tamper contacts
and sends service events however the alarm function is deactivated.
Only the system administrator or service technician can block a detector. It can be achieved by
choosing Settings / Devices / Bypass and selecting Yes on the LCD keypad. Another option is to
use the J-Link software by clicking on the detector in the Settings / Diagnostics / Disabled column.
A blocked detector is marked with a yellow circle until it is turned back on using the same
procedure. A device can be also blocked from MyJABLOTRON smartphone app.
3.3. DISABLING TIMERS
To temporarily disable automated scheduled events in the system, a timer can be disabled.
Disabling a scheduled event (e.g. unsetting the system from night guarding at a predetermined time)
will prevent execution of that event (e.g. while on vacation).
A timer can be disabled locally or remotely through the J-Link software by clicking on the section
in the Settings / Calendar / Blocked column. A disabled timer is marked with a red circle until it is
turned back on using the same procedure.
4. CUSTOMIZING THE SYSTEM
4.1. CHANGING A USER ACCESS CODE
If the system is set up without prefi xed codes, only the system administrator and the service
technician can change the security codes. The system administrator can make changes from
both the LCD keypad menu the J-Link software and MyJABLOTRON smartphone app. The code
can be changed after authorization by selecting Settings / Users / User / Code. To input a new
code, you must enter edit mode (the code will start fl ashing) by pressing Enter, enter the new code
and confi rm by pressing Enter again. After completing the changes, they must be confi rmed by
choosing Save when the system prompts you with “Save Settings?”.
If the system is set up with prefi x codes, individual users can be allowed to change their codes from
the LCD menu on the keypad.