jablotron 100+, Manual

Page: 9 / 26

EN
29
When unsetting the alarm using the segment buttons,
user authorization is always required. When
setting the alarm and controlling automated
processes using the segment buttons, user
authorization is optional for each segment.
Users can authorize
themselves by entering their assigned codes or using
their RFID cards/tags. Each user can have one code
and up to two RFID chips (cards or tags).
Recommended contactless chips: JABLOTRON 100
+
, Oasis or other third-party chips compatible
with 125 kHz EM. If higher security is required the alarm system can be set up to use confi rmed
authorization using RFID chips and codes (optional). If the users want to control multiple segments
simultaneously, they must authorize themselves and then press segments of the particular
sections subsequently. This way the users can for example set the house and unset the garage
within one single authorization. If the “Code with a prefi x” parameter is enabled, the keypad
authorization code can consist of up to eleven digits: a prefi x (one to three digits), an asterisk *
(which separates the prefi x and main code), and a 4,6 or 8-digit code depending on confi guration
(for example: 123*12345678, or 1*12345678). All users can change their own codes which follow
the prefi x. The code can be changed from the keypad with the LCD display, the J-Link software or
MyJABLOTRON app.
If the “Code with a prefi x” parameter is enabled, the users can be allowed to change their code.
If the “Code with a prefi x” parameter is disabled, the codes can be changed only by the
Administrator.
2.1.2. KEYPAD CODE AUTHORIZATION
Authorization with a user code is done by typing a valid code into a keypad or with an RFID tag.
It is possible to use 4, 6 or 8-digit codes in the system.
The system can be confi gured to be used with prefi x codes or without them (default settings). For alarm
systems with a higher number of users the prefi x can be enabled. To change this option, please contact
the service technician of your alarm system.
Code without a prefi x:
cccc
where:
cccc is a 4, 6 or 8-digit code, allowed codes are from 0000 to 99999999
Default control panel code Administrator: 1234; 123456; 12345678
;