background image

44

User Manual

 JABLOTRON 100

+

JABLOTRON ALARMS a.s. hereby declares that the control panels JA-103K a JA-107K are in 
a compliance with the relevant European Union harmonisation legislation: Directives No: 2014/53/EU, 
2014/35/EU, 2014/30/EU, 2011/65/EU, when used as intended. The original of the conformity asse-
ssment can be found www.jablotron.com – Downloads section.

Note

: Although these products do not contain any harmful materials we suggest you return these 

products to the dealer or directly to the producer after use.

PARAMETER

JA-103K

JA-107K

Dimensions

268 x 225 x 83 mm

357 x 297 x 105 mm

Weight with/without AKU

1844 g/970 g

7027 g/1809 g

Reaction to invalid code 
entry

Alarm after 10 wrong code entries

Event memory

Approx. 7 million latest events, including date and time

Power supply unit

Type A according to EN 50131-6

T 031 note: In case of a main power failure is the system backed up for 24 hours 
and at the same time is a failure report sent to the ARC.

GSM communicator (2G)

850 / 900 / 1800 / 1900 MHz 

Classifi cation

Security grade 2 according to EN 50131-1

Operational environment

Environmental class II (indoor general) according to EN 50131-1

Operational temperature 
range

-10 °C to +40 °C

Average operational humidity

75 % RH, non-condensing

Complies with

EN 50131-1 ed. 2+A1+A2, EN 50131-3, EN 50131-5-3+A1, 
EN 50131-6 ed. 2+A1, EN 50131-10, EN 50136-1, EN 50136-2, EN 50581

Radio operating frequency 
(with the JA-11xR module)

868.1 MHz

Radio emissions 

ETSI EN 300 220-1,-2 (module R), ETSI EN 301 419-1, ETSI EN 301 511 (GSM)

EMC

EN 50130-4 ed. 2+A1, EN 55032 ed. 2, ETSI EN 301 489-7

Safety conformity

EN 62368-1+A11

Caller identifi cation (CLIP)

ETSI EN 300 089

Operational conditions

ERC REC 70-03

Certifi cation body

Trezor Test s.r.o. (no. 3025)

Summary of Contents for 100+



























Reviews: