32
User Manual
JABLOTRON 100
+
1. Authorize yourself using
the keypad (enter a code or hold
a card or a tag up to the reader).
The green backlit indication button
will start fl ashing.
1. Authorize
yourself using the key-
pad (enter a code, hold
a tag up to the reader).
2. Press
the left segment button
of the section where
the alarm has been
triggered.
3. Unsetting is
fi nished
and sirens are silenced.
The green fl ashing
button indicates
unsetting of the
particular section.
The red fl ashing light
indicates alarm memory.
4. Authorize
yourslef and press the
green button again
to cancel the alarm
memory indication.
5. The segment
Indicates the unset
section with a
continuously lit up green
button.
2.1.2.3. DURESS ACCESS CONTROL
This function provides unsetting of the system in a special mode. The system seemingly unsets,
however it triggers a silent panic alarm, which is then reported to selected users (including ARC).
Unsetting under duress is executed by adding 1 to the last number in a valid code.
Example for a code with the prefi x
:
Valid code: 2*9999 Code for unsetting under duress: 2*9990
Example for a code without the prefi x
:
Valid code: *9999 Code for unsetting under duress: 9990
2.1.2.4. PARTIAL ALARM SETTING
The system can also be confi gured to be partially set which allows guarding only by certain
detectors in a section.
Example
: At night, it is possible to set the door and window detectors only,
while motion detectors inside a house do not react to anything.
To fully set the premises in which partial setting is enabled, the button to set the system has to
be pressed twice. After the button is pressed once it fl ashes yellow, when it is pressed a second
time it fl ashes red. If the system is partially set – indicated by a continuous yellow light – the entire
system can be fully set by authorization and pressing the yellow button. Once the button is pressed,
the system will be fully set and the button turns red.
2.1.2.5. TERMINATING A TRIGGERED ALARM
2. Press the right segment
button
of the selected section.
3. The command
is executed,
and the segment button turns yellow
to indicate a partially set section.
Summary of Contents for 100+
Page 2: ...JABLOTRON 100...
Page 25: ...SCAN ME...
