jablotron 100+, Manual

Page: 22 / 26

42
User Manual
JABLOTRON 100
+
4.2. CHANGING, DELETING OR ADDING AN RFID CARD/TAG
If the system is set up with prefi xed codes, users can add, change or delete their RFID tags or
cards from the LCD menu on the keypad. These changes are done after authorization by selecting
Settings / Users / User / Access card 1 (or 2). To enter a new RFID card/tag, you must enter
edit mode (access card 1 or 2 will start to fl ash) by pressing Enter. Then the RFID card/tag must
be placed on to the reader or the serial number must be manually entered. After confi rming by
pressing Enter again, the RFID card / tag is added. To delete an access card, enter “0” into the
serial number fi eld. After the changes are complete the change must be saved by selecting Save
when the system prompts with Save Settings?
The system administrator and the service technician can add, change and delete RFID cards/tags
from both the LCD keypad menu and the J-Link software.
4.3. CHANGING A USERNAME OR PHONE NUMBER
If the system is set up with prefi x codes, users can add, change or delete their telephone numbers
or change their name from the LCD menu on the keypad. This can be done after authorization by
electing Settings / Users / User / Phone. The user must be in edit mode to make changes. This is
done by pressing Enter. After making the changes, they must be confi rmed by pressing Enter again.
To delete a phone number, enter “0” into the phone number fi eld. After the changes are complete
the change must be saved by selecting Save when the system prompts with “Save Settings?”.
The system administrator and the service technician can add, modify or delete a user phone
number or change a user name from both the LCD keypad menu and the J-Link software.
4.4. ADDING/DELETING A USER
Only the system administrator or service technician can add new users to the system (or delete
them). New users can be added to the system (or deleted from it) only through the J-Link software,
or the F-Link software in the case of a service technician.
When creating a new user, it is necessary to assign him with access permissions (rights), sections
the user may operate, programmable outputs he may control, and what type of authorization will be
required.
4.5. CALENDAR EVENTS SET UP
It is possible to confi gure calendar events (unsetting / setting / partial setting, controlling or blocking
PG outputs).
The calendar events can be set up via the J-Link software in the Calendar tab.
For each calendar event, action, section or PG output and event time can be set. Day can be
defi ned by a day of week, month or year. For the selected day you can set up to 4 times to perform
an action or to set repeating at regular intervals.
Therefore, calendar events can be customized not only for sections control but also for controlling
various technologies in the object using PG outputs.
5. EVENT HISTORY
The security system stores all performed operations and events (setting, unsetting, alarms, faults,
messages sent to users and ARCs) in the micro SD card in the system’s control panel. Each entry
includes the date, time (start and end), and source (cause/origin) of the event.