background image

EN

33

A triggered alarm in progress is indicated by a rapidly fl ashing red segment button and a backlit 
indication button. You need to authorize yourself using the keypad in order to terminate the alarm. 
The section remains set, a rapidly fl ashing red segment button indicates the alarm memory. 
Indication will keep on fl ashing even after the system has been unset.

If the alarm memory indication was activated during your absence, search for the cause of the alarm 
in the event history and be very careful when entering and checking the premises or wait until the 
security agency arrives (provided your system is connected to an ARC).

The segment alarm memory indication remains on until the system is set once again. Alternatively, 
it can be cancelled by unsetting the system one more time. Alarm indication can be also cancelled 
from the main menu from the keypad with an LCD display – Cancel warning indication.

Indication of a triggered tamper alarm can be terminated only by a Service technician or 
Administrator.

Note

: When using the “EN 50131-1, grade 2” system profi le, it is always necessary to fi rst authorize 

yourself and then perform the desired action.

Terminating an alarm using a remote control will also unset the corresponding section.

2.1.2.6.   SECTION CONTROL FROM THE MENU OF THE KEYPAD WITH AN LCD 

DISPLAY

Statuses of sections are displayed in the left top part of the keypad’s LCD display. A fully set section 
Is shown by a number in a rectangle fi lled with black colour  

2

 ; a partially set section is depicted by 

a framed number 4 .

Control from the keypad menu:

:: Authorization by a valid code or an RFID chip.
:: Enter the menu by pressing ENTER.
:: Section Control 

 ENTER.

:: Select the desired section using arrows.
:: Pressing ENTER repeatedly will change between section statuses partially set / set / unset.
:: Press ESC to exit the menu.

2.1.3.   USING THE JA-110E AND JA-150E SYSTEM KEYPADS

STATUS INDICATORS
A, B, C, D

LCD DISPLAY

FUNCTION BUTTONS 
A, B, C, D

SYSTEM 

INDICATOR

THE KEYPAD AND 

THE RFID READER

Summary of Contents for 100+



























Reviews: