jablotron 100+, Manual

Page: 10 / 26

30
User Manual
JABLOTRON 100
+
Administrator
or User
authorization
by the code or
RFID tag/card
CANCEL WARNING
INDICATION
SECTION
CONTROL
PG CONTROL
EVENT
MEMORY
SETTING
PREVENTED
FAULTS
IN SYSTEM
BYPASSED
DETECTORS
SYSTEM
STATUS
SETTINGS
DISPLAY
SETTING
MAINTENANCE
MODE
Allows you to cancel alarm/unsuccessful setting
indication in all sections to which the user has access
Allows you to control the system‘s sections to which
the user has access rights and are enabled in the
internal settings.
Allows the user to control PG programmable outputs
depending on the user’s permissions and according to
the internal settings.
Displays a detailed list of the event memory.
Shows a list of triggered detectors preventing setting
the system, provided this option is activated in the
control panel confi guration.
Displays a list of all detectors indicating system faults
from sections to which the user has access rights.
Displays a list of all blocked detectors in sections to
which a user has access rights.
Shows system status (list of triggered detectors,
triggered tamper contacts, low batteries, bypassing,
Allows editing of users and devices
(only when USB is disconnected).
Allows adjustment of keypad backlight intensity and
display contrast.
Allows the Administrator to switch assigned sections
to the Maintenance mode.
Code with a prefi x:
nnn*cccc
where:
nnn is the prefi x, which is the number of the user’s position (position 0 to 600)
* is a separator (key *)
cccc is a 4, 6 or 8-digit code, allowed codes are from 0000 to 99999999
Default control panel code Administrator: 1*1234; 1*123456; 1*12345678;
WARNING: The main Administrator code starts with the prefi x 1
The main Service code starts with the prefi x 0
To change the code type, please contact the service technician of your alarm system.
Structure and description of the internal LCD keypad menu: