jablotron 100+, Manual

Page: 16 / 26

36
User Manual
JABLOTRON 100
+
2.1.3.2. ALARM UNSETTING
Note : If the “Unset section by authorization only during entrance delay” parameter is enabled, then
mere authorization will unset a section where the entrance delayed has been triggered. This option
should be used with caution when using multiple sections.
Consult the installation with a service technician in order to program the desired behavior of the
system.
2.1.3.3. PARTIAL ALARM SETTING
WARNING : This is an additional function of the alarm system.
The system can also be confi gured to be partially set which allows guarding only by certain detectors
in a section.
Example : At night, it is possible to set the door and window detectors only, while selected motion
detectors will not trigger the alarm when somebody moves inside the section.
1. When you enter the
building
(triggering a detector with a “De-
layed zone” reaction), the system
starts indicating an entrance delay
with a continuous tone, the system
indicator and a function button,
both fl ashing red, of the section in
which the delayed entrance has
been triggered.
2. Authorize yourself using
the keypad – the system indicator will
start fl ashing green.
3. Press the function buttons
of the sections you want to unset.
4. The command
is executed
The function buttons and the system
indicator turn green to indicate unset
sections.
1. Authorize yourself using
the keypad (enter a code or hold an
RFID card or tag up to the reader).
The system indicator button will
start fl ashing green.
2. Press the function button
of the selected section.
3. The command
is executed
and the function button turns per-
manently yellow to indicate a partially
set section.