![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_instruction-and-maintenance-manual_3119579045.webp)
Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 45 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
Figure 10. Drawing 9448064
– Cam Gear Assy
A9
Stage Inspection by 2nd person of Sub-Assembly
7.5.1.2
Sub-Assembly B
– Crankcase and Camshaft
B1
1. Clean crankcase, remove old Loctite and clean oil galleries
2. Visually inspect crankcase
B2
Fit inner stud O Rings with a small smear of rubber grease or relevant lubricant.
B3
Inspect all studs for tightness threads and stretching
B4
Check oil suction pipe for security, replace O-ring.
B5
Fit oil relief valve assembly, oil pressure sender and front plug/hourmeter switch.
Relief washer should have a bevel to accept plunger (relief poppet). To increase oil
pressure 1 or 2 AN4 washers can be placed behind the relief spring.
B6
1. Lightly blue bearing shells and one crankcase half
2. Fit bearing shells.