Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 39 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
No.
Operation
Tools Required
15 Remove Tacho Lead
-
16 Remove Left and Right Ignition Coil Leads
-
17 Remove Muffler Assy
3/16" Ball End Allen Key
18 Undo Engine Mount Bolts
7/16" Tube Socket
7/16" Spanner
19 Remove Engine from Engine Mount Frame
-
7.4
ENGINE DISASSEMBLY
No.
Operation
Tools Required
1 Mount Engine on an engine stand in vertical
position
As required for stand
2 Remove Spark Plugs
Spark Plug Socket
3 Remove Oil Pressure Sensor
17mm Spanner
4 Remove Oil Filter
Oil filter tool
5 Oil Pressure Valve may be removed by
removing snap ring (1)
Snap Ring Pliers
6 Extract Valve Seat (1), Valve (1), Spring (1)
-
7 Remove Oil Pump Assembly (Housing, Rotor,
Stator & Backing Plate)
1/4" Allen Key
8 Remove 4 capscrews in front oil seal carrier
and break seal on crankcase
1/4" Allen Key
9 Remove Fuel Line and Carburettor
Flat-bladed screwdriver
10 Remove Fuel Pump, Gasket and Push Rod
1/4" Allen Key
11 Remove Distributor Cap Clamps, Caps and
Rotors
5/32" Allen Key
12 Remove Starter Motor
3/16" Allen Key
13 Remove Alternator Mount
7/16" Socket
5/16 Ring O/End spanner
14 Remove Ignition Coils from Alternator Mount
3/16" Allen Key