![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_instruction-and-maintenance-manual_3119579052.webp)
Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 52 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
C5
1. Disassemble and clean off all carbon.
2. Inspect rocker tip for wear. Replace any with excessive wear.
3. Measure bushes and record on build sheet.
4. If over service limits, replace.
Figure 19. Drawing 9449064
– Rocker Bush Removal
1. Clean off old Loctite from rocker bore.
2. Press in Bushes.
Note - The width of the bushes is critical for the correct amount of end float, so
they must be pushed right home.
Figure 20. Drawing 9A011A0D
– Rocker Shaft Install
1. Put capscrew through clamp hole and check rocker end float. Must be 0.1
to 0.4mm (0.004" to 0.010").
2. Clean up, oil well and reassemble.
Cylinders