![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_instruction-and-maintenance-manual_3119579022.webp)
Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 22 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
Test run engine.
i)
Turn engine on starter with both ignitions OFF until oil pressure registers
ii)
Start engine. Observe starting, warm up & acceleration behavior to maximum
RPM (10 seconds max)
iii)
Check temperatures & pressures.
iv)
Stop Engine.
5.4
Check After Initial 25 Hours
Details of specific operations are shown in Chapter 6 "Maintenance" of this manual.
Remove engine cowlings
Check engine mounts.
Thoroughly check engine for missing or loose bolts, nuts, pins, etc.
Check fit of cooling air ducts & baffles. Check the engine (including oil cooler) for signs
of abrasion against cowls and ducts.
Check induction and exhaust flange for loose bolts.
Check safety wires, ignition wiring & hose connections.
Oil Change
. Refer to Chapter 6 “Maintenance” for details. Use normal aviation running
oil.
Change oil filter. Inspect old filter for excessive contamination, metal filings etc.
Retorque cylinder head bolts at 20 ft.lbs in diagonal pattern
Check exhaust system, check exhaust cap screw tensions.
Check fuel system for leaks & abrasion.
Check wiring for damage & for tightness.
Test run engine.
v)
Turn engine on starter with both ignitions OFF until oil pressure registers
vi)
Start engine. Observe starting, warm up & acceleration behavior to maximum
RPM (10 seconds max)
vii)
Check temperatures & pressures.
viii)
Stop Engine.
5.5
50 Hours Check
Details of specific operations are shown in "Maintenance" section of this manual.