manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 76

IWATSU ENTERPRISE-CS SYSTEM FEATURES - 58 

Delayed Ringing 

Allows outside lines ringing at a telephone to ring at another telephone or 
group of telephones after a predetermined period of time. 

Dialed Number Identification Service (DNIS)  

ECS supports DNIS name and number on SIP trunks, T1, ISDN PRI and 
ISDN BRI lines.  

DNIS Alphanumeric ID 

Based on programming, the DNIS (Dialed Number Identification Service) 
alphanumeric ID is displayed on the station LCD when a call is received on a 
DNIS trunk.  A call can be routed to a station, master hunt group, or voice 
mailbox according to the DNIS information received. DNIS numbers can be 
assigned a 16-character alphanumeric ID through Iwatsu ECS programming or 
by the service provider.  

The information displayed on the station LCD during calls on DNIS lines may 
be customized through database programming.  During a call, you may change 
the way the call information is displayed by pressing the [CID Display 
Change] key.  There are ten different display modes available to assign to the 
[CID Display Change] key.  You can scroll through each programmed display 
mode choice each time you press the [CID Display Change] key. 

Through programming, the number of calls permitted to simultaneously ring in 
on a specific DNIS number can be limited and overflow to voice mail, another 
extension or disconnected. 

Direct Inward Dial (DID) Trunks 

Iwatsu Enterprise-CS support DID numbers provided by your service provider. 
This service, typically offered on PRI and SIP lines, allows any number of 
telephones to be called directly from the outside without the need of having a 
dedicated circuit for every telephone. DID numbers are available from your 
SIP trunk, ISDN PRI/BRI or T1 service provider. 

Through programming, the number of calls permitted to simultaneously ring in 
on a specific DID number can be limited and overflow to voice mail, another 
extension or disconnected. 

DID Alphanumeric ID 

DID (Direct Inward Dial) numbers may be assigned a 16-character 
alphanumeric ID to identify the party being called, type of call, or purpose of 
call. 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands