Iwatsu ENTERPRISE-CS, Owner'S Manual

Page: 151 / 274

IWATSU TELEPHONE USER GUIDE - 133
If your phone does not have keys assigned for Flash or Short Flash:

Press the Feature key FEAT then dial

for Flash

Press the Feature key FEAT then dial

for Short Flash
Floating Outside Line Group Access
Allows for a number of outside lines to be assigned to one of 250 groups.
These groups may be used for incoming calls, outgoing calls or both incoming
and outgoing calls.
To access an outside line group:

Lift the receiver.

Press the Float key FLT then dial the outside line group number

-

or

for the desired group, or, press the Float key
FLT
for
the desired group if that group is assigned as a Float key on a
Multipurpose key.

Multiple Float keys may be assigned to one group.
Forced/Verified Account Code
Requires you to enter a 1-12 digit code to make outside calls. These codes
may be either fixed or variable in length and each telephone may be
programmed for one of the four following account code entry options.
FORCED-TOLL: code entry required only for toll calls
FORCED-ALL: code entry required for all calls
VERIFIED-TOLL: code entry required only for toll calls
VERIFIED-ALL: valid code entry required for all calls
A table of 10 phone numbers may be programmed to allow calling without
account code entry. This option is very helpful because it allows important
emergency numbers to be dialed by anyone. The verification table, for
verified account code entry, shares memory with System Speed Dial and may
contain 2000 account codes. The Forced/Verified Account Code
programming allows the option of having or not having the account displayed
on the LCD of the phone and the SMDR printout.

Lift the receiver

Press an outside line key

Wait for the dial tone

Dial the desired phone number

Dial
