manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 109

 

IWATSU TELEPHONE USER GUIDE - 91 

Iwatsu ICON Series 5900 IP Telephone 

The Iwatsu ICON Series 5900 is 
equipped with a two-line, 16-character 
LCD display, and nine multipurpose 
keys. The 5900 has a large incoming 
call / MSG indication LED on the top 
of the telephone and standard full-
duplex speakerphone.  

Ringer, Handset, and Speaker volume 
for the 5900 are controlled by using 
the - and + keys and changes based on the 
state of the telephone. The 5900 includes 
a three-position integrated pedestal and a 
wall-mount option that simplifies installation. An IX-ELK9 Line Key 
Expansion is an optional unit for the 5900. Also, the Ticker Field Display 
(TFD) can be programmed in the ECS database to scroll across the 5900 
display. 

The 5900 IP telephone provides two new features that simplify installation and 
reduce installation time. Iwatsu Auto-Discovery Mode is a propriety network 
protocol developed by Iwatsu that allows the ICON series 5900 IP telephone to 
automatically identify itself on the local network and connect to the ECS 
system. Manual Setup Quick Mode provides a simplified method for manually 
entering configuration information through the station LCD menu. 

The 5900 supports Power over Ethernet or local power when the optional IX-
59AC (PN: 505099) is installed. 

Note:

 The Iwatsu ICON Series 5900 does not support Direct Station 

Selection (DSS) units. 

 

 

 

Iwatsu ICON Series  

5900 IP Telephone 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands