manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 130

IWATSU TELEPHONE USER GUIDE - 112 

Busy Number Callback 

Allows you to instruct the ECS to periodically call you to try calling a 
previously dialed outside number again. To have the ECS dial the number 
simply pick up the receiver. 

When you dial an outside number and there is no answer or a busy signal: 

 

Do not hang up. 

 

Press the Feature key 

FEAT

 then dial 



, or, press the Busy Number 

Callback key 

TRNK C/B

 if assigned as a Multipurpose Key and the 

lamp will be solid red. 

 

Wait for a confirmation tone. 

 

Hang up. 

To change the Callback time interval: 

 

Dial the desired interval time in minutes 



 before you hang up. 

To Cancel: 

 

Press the Speaker key 

SPKR

 

 

Wait for the dial tone 

 

Press the Feature key 

FEAT

 then dial 



, or, press the Busy 

Number Callback key 

TRNK C/B

 if assigned as a Multipurpose key 

then dial 

 and the lamp will be off. 

 

Wait for a confirmation tone. 

 

Press the Speaker key 

SPKR.

 

Busy Outside Line Queuing 

Allows you to instruct the ECS that you wish to be notified when the outside 
lines are no longer busy.  When an outside line becomes available, your phone 
will ring.  Picking up the receiver will give you outside dial tone.  If you 
previously dialed the outside number, that number will automatically be dialed 
when the receiver is picked up. 

When attempting to make an outside call and all lines are busy: 

 

Do not hang up. 

 

Press the Feature key 

FEAT

 then dial 



 and you will hear tones. 

 

Dial the phone number, or, press the Busy Outside Line Queue key 

TRNK QU

 if assigned as a Multipurpose key, you will hear tones and 

the lamp will be solid red. 

 

Dial the phone number. 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands