manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 43

 

GENERAL DESCRIPTION - 25 

Iwatsu ICON Series 5900 IP Telephone 

The Iwatsu ICON Series 5900 is equipped with a two-line, 16-character LCD 
display, and nine multipurpose keys. The 5900 has a large incoming call / 
MSG indication LED on the top of the telephone and standard full-duplex 
speakerphone.  

Ringer, Handset, and Speaker volume for the 5900 are controlled by using the 
- and + keys and changes based on the state of the telephone. The 5900 
includes a three-position integrated pedestal and a wall-mount option that 
simplifies installation. An IX-ELK9 Line Key Expansion is an optional unit 
for the 5900. Also, the Ticker Field Display (TFD) can be programmed in the 
ECS database to scroll across the 5900 display. 

The 5900 IP telephone provides two new features that simplify installation and 
reduce installation time. Iwatsu Auto-Discovery Mode is a propriety network 
protocol developed by Iwatsu that allows the ICON series 5900 IP telephone to 
automatically identify itself on the local network and connect to the ECS 
system. Manual Setup Quick Mode provides a simplified method for manually 
entering configuration information through the station LCD menu. 

The 5900 supports Power over Ethernet or local power when the optional IX-
59AC (PN: 505099) is installed. 

Note:

 Remote stations will operate in both a VPN or non-VPN environment 

(Internet mode). Internet mode allows up to 64 IP stations to operate remotely 
without a VPN connection. 

Iwatsu ICON Series IP Softphone 

The Iwatsu ICON Series Softphone is part of the ICON Series of telephones 
from Iwatsu. The ICON Softphone offers all the functionality of a fixed IP 
phone, yet it resides on the PC and uses the PC’s IP connection to 
communicate with the Iwatsu Enterprise-CS. The ICON Softphone has a fixed 
ICM key and two fixed line keys plus fixed keys for Transfer, Feature, Mute, 
and Hold/DND. Four tabs provide extended access to Features, Contacts, Call 
Logs, and Settings. 

Note:

 Remote stations will operate in both a VPN or non-VPN environment 

(Internet mode). Internet mode allows up to 64 IP stations to operate remotely 
without a VPN connection. 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands