Iwatsu ENTERPRISE-CS, Owner'S Manual

Page: 59 / 274

GENERAL DESCRIPTION - 41
IX-8SUBS-4 / IX-8ESUBS-4 Analog Station Card With
Caller ID
The IX-8SUBS-4 supports eight on-premise or four on-premise and four off-
premise(ports 5-8) single line telephone extensions, Caller ID, Caller ID for
call waiting, and message waiting lamps (neon or LED lamps). An IX-8SUBS-
4 can be expanded to support up to 16 single line telephones by adding an IX-
8ESUBS-4 single line telephone expansion card. The IX-8SUBS-4 includes
the DTMF receivers required for 2500 (touch-tone) type telephones and also
provides a hardware loop open feature for Voice Mail Integration.
This card is designed with an on-board ring generator and power converters,
the IX-DCDC and IX-RNGUM cards are not required with this card.
Ports: 8 ports/card, 16 ports/card when configured with the IX-8ESUBS-4
expansion card. 4 off-premise (SUBL mode) ports (Ports 5-8 only).
Stations: 2500 (Touch-tone) type telephones.
Additional Power: None
Loop Limit: 700 Ohms
IX-408 Eight-Port Digital Station/ Four-Port Caller ID
Trunk Card
An IX-408 card provides eight digital station ports and four caller ID trunk
ports. The eight station terminal ports for Attendant Consoles, DSS Units and
Digital Telephones are connected through star wiring. Each port connects the
station terminal with a two-wire cable that carries bi-directional data
transmission (ping-pong transmission). The four caller ID trunk circuits
interface the Iwatsu Enterprise-CS to four Caller ID loop start circuits.
Ports: 12 ports/card
Stations: 2 ports required for: IX-ATT,
1 port required for: IX-DSS-3, IX-BLF, IX-KTD/S-3, IX-12KTD-2,
DCKT970 (may share a port with a key telephone), IX-
DCKT900 (may share a port with a key telephone),
IX-MKT, IX-COMLINK-2, IX-DDPH, IX-BLF,
IX-MSGU (per channel), IX-BPAD, and IX-BPCU.
Additional Power: None
Features for Caller ID:
600/900 Ohm impedance selection, Long/Short
distance selection