manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 131

 

IWATSU TELEPHONE USER GUIDE - 113 

 

Hang up. 

To Cancel: 

 

Press the Speaker key 

SPKR.

 

 

Wait for the dial tone. 

 

Press the Feature key 

FEAT

 then dial 



, or, press the Busy 

Outside Line Queue key 

TRNK QU

 if assigned as a Multipurpose key, 

then dial 

 and the lamp will be off. 

 

Wait for confirmation tone. 

 

Press the Speaker key 

SPKR.

 

Busy Override 

Allows you to alert a busy extension user that you are waiting to speak with 
them.  The busy extension user will hear periodic tone bursts through the 
speaker.  If they have a display the display will identify the calling party. 

When you dial a busy extension: 

 

Do not hang up. 

 

Press the Busy Override key 

OVER

 and you will hear a ringing signal. 

 

Wait to be answered. 

To answer a Busy Override: 

 

Hang up on the first call, or, press the Call Park key 

PARK.

 

 

Press the Intercom key 

ICM.

 

To alternate between calls: 

 

Press the Call Park key 

PARK

 

Call Coverage 

The Multipurpose keys on the Digital Telephones may be programmed to 
allow both audible and visual indication of a call ringing at another extension.  
Calls made to an extension that is represented as a Call Coverage key on 
another phone may be answered by that phone by pressing the Call Coverage 
key.  The visual indication is immediate and the audible indication may have 
one of the three modes:  Immediate, delayed, or no ring.  When the extension 
monitored by a Call Coverage key is not in the ringing state, the Call Coverage 
key will function as a Direct Station Selection/Busy Lamp Field key.  The Call 
Coverage feature will support Intercom Tone (ringing) and Outside Line calls.  
Intercom calls are indicated by a slow flashing green lamp and Outside Line 
calls are indicated by a fast flashing green lamp. A good application for this 
feature would be a secretary that needs to answer calls for others in the office 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands