manualshive.com logo in svg

Iwatsu ENTERPRISE-CS, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE-CS Owner'S Manual Download Page 206

ATTENDANT POSITION USER GUIDE - 188 

Menu Operations in Group Ringing Mode (Forced Night) 

When an ECS system is in the Group Ringing Mode, pressing the existing 
Night Mode key from an Iwatsu ICON Series attendant position (5810, 5910 
and 5930) will take you to the Select Ringing Mode screen with limited 
selections. The menu will prompt the attendant to select either In Forced Night 
(System Night Mode) or In Group Mode. If In Forced Night mode is selected, 
all trunks are forced into the system night mode. When In Group Mode is 
selected, the trunks return to the mode selected by the Trunk Group key. 

This operation has a System Night override for each ringing group. For 
example: All trunks will generate ringing based on the Night ringing table. 

 

 

Key Lamp Indication for Day-1, Day-2, Day-3, and Night Mode 

The Group Night Mode key will change the LED lamp status based on the 
Group Ringing mode. The LED lamp indication is reflected for the ringing 
mode on all Iwatsu telephones (legacy and ICON Series) with a Night Mode 
key. 

 

Day-1 Ringing Mode = No lamp indication. 

 

Day-2 Ringing Mode = Slow red flash. 

 

Day-3 Ringing Mode = Fast red flash. 

 

Night Ringing Mode = Solid red flash. 

 

Note:

 Iwatsu ICON Series Self-Labeling Key name change is not supported 

with the Multiple Ringing Mode. 

 

 

Summary of Contents for ENTERPRISE-CS



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands