ITW Dynatec DYNAMELT D15 Series, Technical Documentation Manual

Page: 121 / 234

ITW Dynatec Programming Page 5-45
V6 DCL Touch Screen Controller for Dynamelt M & D ASUs Revised 1/16
Log Book Screen

To go to this screen, press the Log Book button on the Settings Screen.

The Log Book provides a read
‐
only history of the last 100 (maximum) controller faults and events.

If several systems are controlled by the HMI, all events will be listed here.
Item Description
1
The most recent event is recorded at the top of the Event List.
• Examples of events:
System Status OFF, READY, RUNNING, STANDBY, NOT READY,
Recipe loaded.
•
Examples of controller faults:
RTD Fault, Temperature Alarm, Minimum Level, Drive
Failure, Parameter CRC Error, Over-temperature, Communication error.
See point "Faults, Alarms".
2
BACK Button
Press to return to the previous screen.
3
Scroll Buttons
Press the arrow buttons to scroll up and down through the Event List.
1
2
3