ITW Dynatec DY 2008, Operating Manual

Page: 29 / 98

123
inch RETURN
ENCODER 1:
ENCODER 2:
ENCODER 3:
ENCODER 4:
500
1000
1000
1000
PULSES / Meter
PULSES / Meter
PULSES / Meter
PULSES / Meter
STOP 1: 0 m/min
2: 0 m/min
3: 0 m/min
4: 0 m/min
ENCODER SCALING MENU
123
RETURN
CO
C CONTRAST- RETURN
LANGUAGE
LOAD PROGRAM
CHANNEL : TRIGGER
TRIGGER LOCK
CHANNEL : ENCODER
ENCODER SCALING
MIN/MAX SPEED SET.
CHANNEL MODE
CHANGE SECURITY LOCK
1
2
3
4
5
6
7
8
9
Code
--
--
--
--
--
--
--
--
STOP 1: 0 m/min
SERVICE SETTINGS 1 OF 3
123
2: 0 m/min
3: 0 m/min
4: 0 m/min
CONTRAST-
Manual #50-14 Revised 8/08
Page 4-- 11
C. 1998
Service Setting Programming Conventions
The following programming conventions are employed in the Service Settings Menus:
The “numeral” icon is displayed in the lower
right corner of the screen to indicate that the
numeric keypad should be used to enter the
desired value.
The “enter” icon is displayed in the lower
right corner of the screen to indicate that the
ENTER button (see page 4-1) should be
pressed in order to accept the selected
value.
Press the CLEAR Button on the numeric
keypad to revert a modified parameter to its
original value provided the ENTER button
has not already been pressed.
Press the RETURN (F4) button to go to the
next higher level of programming menus or
to undo a programming change as long as
the ENTER button has not been pressed.
Display Contrast Adjustments
The display brightness (contrast) is adjusted from any of the three Service Settings Menus
via the following procedure. Take care not to adjust the display too bright as this will tend
to reduce the life of the display.
This button is used to make the display
background darker.
This button is used to make the display
background lighter. NOTE: do not set the
display too bright as this will tend to reduce
the life of the display.