•
Impellers (101 through 101M)
•
Thrust bearing end cover, outboard (ball and sleeve bearing construction only) (109A)
•
Shaft (122)
•
Radial bearing end cover, inboard (ball bearing construction only) (160) and (160A)
•
Impeller key (178)
•
Bearing spacer (217)
•
Snap ring (361F)
•
Locating ring (361H)
An alternative approach is to stock a complete rotating element. This is a group of assembled parts that
includes all rotating components except the bearings (and parts), mechanical seals, and coupling.
Recommended spare parts
When ordering spare parts, always state the serial number, and indicate the part name and item number
from the relevant sectional drawing. It is imperative for service reliability to have a sufficient stock of
readily available spare parts.
Stock these spare parts, where applicable:
•
Cartridge mechanical seal (383)
•
Filter Assembly (550A)
•
Thrust bearing (duplex pair) (112A)
•
Oil rings (114, 114A)
•
Sleeve bearings, two (117) (sleeve bearing construction only)
•
Throttle bushing, sleeve (128)
•
Throttle bushing (129)
•
Bearing locknut (136)
•
Stage ring (144)
•
Center bushing (155)
•
Casing wear rings (164, 164A, 164B)
•
Impeller wear rings (202, 202A, 202B, 203)
•
Center sleeve (205)
•
Bearing Spacer (443V)
•
Labyrinth seal, outboard (332A)
•
Labyrinth seal, outboard (332C)
•
Labyrinth seal, inboard (333A)
•
Casing gasket (351)
•
Bearing lockwasher (382)
•
Bearing end-cover gasket (360A)
6.6 Reassembly
Model 3600 i-FRAME API610 11th Edition / ISO 13709 2nd Edition to current API BB3 Multi-Stage, Axially Split Installa-
tion, Operation, and Maintenance Manual
125
Summary of Contents for GOULDS PUMPS 3600 i-FRAME
Page 2: ......
