NOTICE:
Make sure the expulsion port is at the 6 o’clock position and is properly seated.
3.
Lift the lower half of the bearing housing (134) into place.
4.
Install the case-to-bearing housing studs (371T).
5.
Place the installed inboard labyrinth seal (333A) in the lower housing.
6.
Finger tighten the lower housing to the case-to bearing housing flange with the case-to-bearing
housings studs (371T) and nuts (427J).
Figure 94: Radial sleeve bearing assembly
7.
Install the sleeve bearing (117).
a) Apply Lucas Heavy Duty Oil Stabilizer, or equivalent lubricant to the lower half of the sleeve
bearing (117). Place the lower half of the sleeve bearing (117) on the shaft (122) and slide it
around the shaft into the lower bearing housing. One may need to use the adjusters to lift the
frame first. Install the dowel pins in the pre-drilled dowel pin holes between the housing flange
and the head-bearing flange.
b) Tighten the nuts (427J) on the bearing housing to the head studs (371T).
c)
Apply Lucas Heavy Duty Oil Stabilizer, or equivalent lubricant to the upper half of the sleeve
bearing (117). Place the upper half of the sleeve bearing (117) on the shaft (122).
d) Install the two socket head cap screws that hold the upper and lower halves of the sleeve bear-
ing (117) together.
8.
Install the outboard labyrinth seal (332A).
9.
Install the upper half of the bearing housing (134). Prior to installing the upper half, apply a thin coat
of Permatex® Aviation Form-A-Gasket® (or equivalent) to the lower half bearing housing to prevent
possible oil seepage.
10. Install the two taper pins to line up the upper and lower halves of the bearing housing (134).
11. Install the hex cap screws that connect the upper and lower halves of the bearing housing (134).
6.6.11 Attach the i-ALERT
®
2 Equipment Health Monitor to the pump
Tools required:
•
5/32 inch hex wrench
6.6 Reassembly
120 Model 3600 i-FRAME API610 11th Edition / ISO 13709 2nd Edition to current API BB3 Multi-Stage, Axially Split Installa-
tion, Operation, and Maintenance Manual
Summary of Contents for GOULDS PUMPS 3600 i-FRAME
Page 2: ......
