12. Rotate the lower half of the sleeve bearing (117) around the shaft (122) in order to remove the bear-
ing from the lower housing.
13. Remove the lower half of the bearing housing (134).
14. Remove the outboard labyrinth seal (332A) and the inboard labyrinth seal (333A).
Figure 56: Labyrinth seal removal
6.4.9 Disassemble the thrust end (sleeve/tilt pumps)
Figure 57: Thrust bearing housing disassembly
1.
If the pump is supplied with a main shaft oil pump (219), remove the hex cap screws (370L) and
remove the main shaft oil pump (219). Half of the coupling (118) will remain on the main shaft oil
pump (219). If the pump was not supplied with a main oil shaft pump (219), go to step 4.
2.
Remove the hex cap screws (370N) to remove the oil pump adapter (318A).
6.4 Disassembly
82
Model 3600 i-FRAME API610 11th Edition / ISO 13709 2nd Edition to current API BB3 Multi-Stage, Axially Split Installa-
tion, Operation, and Maintenance Manual
Summary of Contents for GOULDS PUMPS 3600 i-FRAME
Page 2: ......
