•
Drill
•
Feeler gauges
•
Hex wrenches
•
Induction heater
•
Lifting sling
•
Micrometers (inside and outside)
•
Open end wrenches
•
Press
•
Soft face hammer
•
Spanner wrench
•
Spanning type puller
•
Tap
•
Torque wrench with sockets
•
Lifting eyebolt (dependent on pump / motor size)
6.4.3 Prepare for disassembly
1.
Close the isolation valves on the suction and discharge sides of the pump.
2.
Drain the liquid from the piping; flush the pump if necessary.
3.
Disconnect all auxiliary piping, tubing, and equipment that will interfere with the removal of the head
and the rotor.
4.
Remove the oil drain plugs (408A) from the bottom of the bearing housings (134, 134A) and drain
the oil.
Dispose of the oil in accordance with applicable regulations.
234B
232
233
408A
408A
134
134
235B
234A
501B
Figure 40: Coupling guard disassembly
5.
Remove the oiler bottle (251) and store it in a safe place.
6.
Remove the coupling guard (501B).
Refer to Remove the coupling guard in the Commissioning, Startup, Operation, and Shutdown
chapter.
7.
Unbolt and remove the coupling spacer (235B).
Follow the instructions provided by the coupling manufacturer for assistance.
6.4 Disassembly
Model 3600 i-FRAME API610 11th Edition / ISO 13709 2nd Edition to current API BB3 Multi-Stage, Axially Split Installa-
tion, Operation, and Maintenance Manual
71
Summary of Contents for GOULDS PUMPS 3600 i-FRAME
Page 2: ......
