iTero Element 5D Plus User Manual Download

Page: 193 / 208

C FCC compliance information statement (SDoC)

We Align Technology Ltd. declare:

Type of equipment:

The iTero Element 5D is an integrated intraoral imaging system capable of intraoral optical

impression for CAD/CAM of dental devices which also captures 2D color images, and Near Infrared (NIR) images.

Brand name or trademark

: iTero Element 5D

Modular component used:

Qualcomm Atheros, FCC ID PPD-QCNFA364AH complies with FCC requirements

according to Declaration of Conformity issued by Advantech Co., Ltd.

Country of origin:

Israel

Manufacturer:

Align Technology Ltd.

Responsible Party name (IN USA):

Align Technology, Inc.

Address:

2820 Orchard Parkway San Jose, California 95134 USA

Telephone:

+1 (408) 470-1000

Internet E-Mail:

[email protected]

iTero Element® 5D Plus User manual

175

Summary of Contents for Element 5D Plus





































































































































































































Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands

iTero Element 5D Plus, User Manual

Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands