iTero Element 5D Plus User Manual Download

Page: 131 / 208

Working with orders

Tap the

Orders

button to display a list of all your orders. The button may contain a badge that indicates the number of

orders that have not been submitted yet.

The

Orders

page is made up of two panes listing the orders that are still in progress and the ones that have already

been submitted.

You can view the following details for each order: the patient’s name, chart number, the scan date, case type,
whether NIRI data was captured, and the status of the order.

The order could have one of the following statuses, depending on the case type:

Rx Created:

The Rx has been filled in, but the patient has not been scanned yet

Scanning:

The scan process is in progress

Sending:

The scan is in the process of being sent

Sent:

The case has been sent

iTero Modeling:

The order has been sent to iTero Modeling

Lab Review:

The order has been sent to the lab for review

Align Production:

The case is undergoing an internal process

Exporting to Doctor Site:

The case is on the way to the IDS portal

Completed:

The flow is completed

iTero Element® 5D Plus User manual

113

Summary of Contents for Element 5D Plus





































































































































































































Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands

iTero Element 5D Plus, User Manual

Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands