iTero Element 5D Plus User Manual Download Page 72

Page: 72 / 208

3.6.2.4

Defining the signature settings

You can define the default settings that are displayed when sending an order to the lab.

To define the signatures settings:

1. Tap the

Signature Settings

button.

Figure 59: Signature Settings window

2. Define the default signature settings.

Signature setting

Signature options

License

Add your license number.

Signature

Add your signature.

Signature Usage

Select one of the following signature options:

Sign once and save for use with each Rx

Do not save my signature (requires a signature for each Rx)

Disable this function (for this user only)

3. Tap

to save the changes and return to the

Settings

window.

iTero Element® 5D Plus User manual

Summary of Contents for Element 5D Plus





































































































































































































Search results

Summary of Contents for Element 5D Plus

Reviews:

Brands by name

Popular brands

iTero Element 5D Plus, User Manual

Search results

Summary of Contents for Element 5D Plus

Reviews:

Brands by name

Popular brands