5 of 36
REGLO ICC - ENGLISH , REV. D, 14-036-E
1. Safety Precautions
ISMATEC
®
tubing pumps are designed for pumping and dispensing applications in
laboratories and industry. As such it is assumed that Good Laboratory Practice (GLP) and
the following recommendations will be observed.
The pump must not be operated outside the designed operating and environmental
conditions. In particular, it is the user’s responsibility not to exceed the specifi ed
maximum differential pressure for the pump head.
The pump must not be used:
For any medical applications.
In explosion proof chambers or in the presence of flammable gases or fumes.
The pump must be switched OFF when pump heads, cassettes or tubing are
inserted or changed.
The permeability of tubing depends on the material used and pressure conditions.
Tubing can also become electro-statically charged. Please be aware of possible hazards
when handling tubing in explosion-proof chambers.
Pump heads consist of rotating parts. Therefore, the pump must not be operated
before the cassettes are fully seated on the pump head.
Do not manipulate the pump head before the pump is switched off and disconnected
from the mains power supply.
Use extreme caution to ensure that no part of your body such as fi ngers, long hair,
jewelry, or loose objects such as cables and tubing, etc. are near the pump head
during operation.
Tubing can tear and burst during operation. The necessary safety measures based on
the specifi c situation must be taken. When pumping corrosive media we recommend
placing the pump in a collecting basin.
The pump should not come in contact with liquid.
Do not open or remove the housing while the pump is operating.
Service and repairs carried out by the customer or by third-party companies voids
all warranties.
Appliance coupler of the power supply is used to disconnect the device from mains supply.
2. Warranty
We warrant the pump to be free of defects, provided they have been installed and operated
correctly according to our operating instructions for a period of 2 years from date of purchase.
If production or material faults can be proven, the defective parts will be repaired or replaced
free of charge at our discretion. A defective pump must be returned in the original ISMATEC
e
packaging or in packaging of equal quality. The duration of the warranty is not affected by
making a claim for warranty service. Further claims are excluded. Shipping costs are charged
to the customer.
Our warranty becomes invalid in the case of:
Improper operation by the user, or if the pump is diverted from its proper use.
Unauthorized modification or misuse by the user or by a third party.
Improper site preparation and maintenance.
Operation outside of the environmental and electrical specifications for the product.
Use of third-party software, hardware, accessories, or consumables purchased by the user
and which do not comply with our specifications.
Pinch Point Warning:
Do not place
your fi ngers on
or around the
pump head.
General Warning
Caution:
Risk of
Electric Shock
Protective Earth:
(Ground)
