6 of 36
REGLO ICC - ENGLISH , REV. D, 14-036-E
6
3. Product
Reglo ICC is a peristaltic pump with independently controllable channels. The intended
use for this pump is precise fl uid dispensing at low fl ow rates up to 43 mL/min for fl uid
delivery applications.
Contents of the package:
Reglo ICC Pump (type as ordered)
1 power supply
Cassettes
1 power cord with country specific plug
Operating Manual
Please check the package and its contents for transport damage. If you fi nd any signs of
damage, please contact your local ISMATEC
®
representative immediately.
4. Rear Panel
1.
24 V DC power Inlet plug
2.
On/Off Switch, circuit breaker
3.
RS-232 In, DB9-female
4.
RS-232 Out, DB9-male
5.
USB 2.0, Mini-B
5.
1.
3.
4.
2.
5. Main Voltage
Use only the supplied power supply and cord for your Reglo ICC pump. DO NOT use any
other substitutes or damage may occur! The power supply is designed to provide DC
voltage for your Reglo ICC pump. It has built in circuit over current protection in the event
the pump is overloaded or a malfunction occurs. The power supply is connected to the
pump by a 4-pin power DIN snap and lock plug. Appliance coupler of the power supply is
used to disconnect the device from the mains supply.
Voltage 100–240VAC
50/60 Hz
