29 of 36
REGLO ICC - ENGLISH , REV. D, 14-036-E
18.3.5 Run time
Set the run time of channel 1 to 150 seconds:
*
1xT00001500[CR]
REQUEST
RESPONSE
18.3.6 Pause time
Set the pause time of channel 1 to 1500 seconds:
*
1xP00001500[CR]
REQUEST
RESPONSE
18.3.7 Cycle Count
Set the cycle count of channel 1 to 23:
*
1”0023[CR]
REQUEST
RESPONSE
18.4 Confi guration
18.4.1 Tubing Inside Diameter
Set the tubing diameter of channel 1 to 0.13 mm:
*
1+0013[CR]
REQUEST
RESPONSE
18.4.2 Backsteps
Set the channel 1 backsteps to 0:
*
1%0000[CR]
REQUEST
RESPONSE
Get the run time of channel 2:
20[CR][LF]
2xT[CR]
REQUEST
RESPONSE
The current run time of channel 2 is 20 seconds.
Get the pause time of channel 2:
20[CR][LF]
2xP[CR]
REQUEST
RESPONSE
The current pause time of channel 2 is 20 seconds.
Get the cycle count of channel 2:
20[CR][LF]
2”[CR]
REQUEST
RESPONSE
The cycle count of channel 2 is 20.
Get the tubing diameter of channel 2:
3.17[SP]mm[CR][LF]
2+CR]
REQUEST
RESPONSE
The channel 2 tubing diameter is 3.17 mm.
Get the backsteps of channel 2:
0[CR][LF]
2%CR]
REQUEST
RESPONSE
The backstep setting for channel 2 is 0.
