iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 59 / 121
11.2.3
XTrueText (X = [1.8])
To user-friendly use, Present Value register value is displayed on LCD as a text instead of
numeric value. There is one 32-bit register assigned with Active state of the Present Value
register, which can contain up to 4 characters according to the ASCII code (see example in
Temperature Name
). The value of 32-bit register is displayed on 8-segment display block as
a text. In case when particular ASCII code value is 0 (NULL), the character is not displayed.
Lower case characters are automatically changed into upper case characters (ex. Register
value for name
“ON”
= 20302).
11.2.4
XFalseText (X = [1.8])
For a more user-friendly use, Present Value register value is displayed on LCD as a text
instead of numeric value. There is one 32-bit register assigned with Inactive state of the
Present Value register, which can contain up to 4 characters according to the ASCII code
(see example in
Temperature Name
). The value of 32-bit register is displayed on 8-segment
display block as a text. In case when particular ASCII code value is 0 (NULL), the character is
not displayed. Lower case characters are automatically changed into upper case characters.
The default name is
“
OFF
”
(register value=1174425414).
11.2.5
XPriority (X = [1.8])
The register contains value which determines parameter priority. Parameter priority
determines the sequence of parameters display inside the particular submenu. The
parameter with the highest priority is displayed as first parameter in submenu. The
parameter with the lowest priority is displayed as last parameter in Submenu. If two or more
parameters have the same priority, the sequence of displaying is based on register
addresses (the register with the lowest address is displayed first). Default priority for all user-
defined parameters is 0.
11.2.6
XConfiguration (X = [1.8])
11.2.6.1 Visibility bit 0
Bit 0 activates parameter visibility. If bit 0 is active, actual value of a parameter is displayed
in the particular Submenu with the defined displaying priority. By default bit is 0 (Parameter
inactive).
11.2.6.2 Editable bit 1
Bit 1 activates possibility of changing parameter value locally from the Room Panel. When
the bit is
“
true
”, the
parameter is editable and user can change its value. By default bit is
“false”
(not editable).
