iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 18 / 121
4.4.6
EXIT_MENU_TIME (40225)
The register contains the time value after which Submenu Edit mode and Settings
Submenu Edit mode is finished and the device leads the user back to the Main Menu
displaying. Time starts after the last Key Pad activation (pushing any button). This
register has min. value 1 min. Default value is 10 sec.
4.5
Device Configuration
4.5.1
VERSION_TYPE (30001)
In this register are encoded type and firmware version of module.
High byte contains information about the type (Room Panel has a version 111
10
(0x6F
16
)
or 239
10
(0xEF
16
) when the device stays in bootloader).
Low byte contains the module firmware version multiplied by 10 (0x0A
16
= 10
10
means
firmware in version 1.0).
An example:
In register 30001 is number 2671
10
= 0x0A6F
16
.
This means that it is a Room Panel with
firmware in version 1.0 (0x0A
16
= 10
10
).
4.5.2
LIVE_TIME (30012)
This 32-bits register contains information in seconds about
“
UP
time”.
After power supply
failure or the Panel restart Live time register value
resets and the “UP time ” counts again.
4.5.3
SENSORS (Register 30029, bits 0 - 2)
The s ensors configuration which are already built-in in the Room Panel is encoded in the
3 first bits of the register Particular bit activity indicate which sensor is in-built (see table
below).
Register bit
number
Inactive state
Active state
Submenu
protection
0
No sensor
Built-in
Temperature Sensor
1
No sensor
Built-in
CO
2
sensor
2
No sensor
Built-in
Humidity sensor
Table 10 Sensors configuration
