iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 51 / 121
9.3
Temperature (TEMP)
Temperature Settings menu contains registers referring to temperature sensor display and
temperature control settings. User is able to switch on/off temperature sensor value display,
set temperature sensor filter or change temperature sensor offset. All available parameters
are presented in the table below:
Parameter
number
Modbus
address
Dec
address
Hex
address
Register Name
Access
Description
3.1
40316
315
0x13B
TEMPERATURE_ CONFIGURATION bit 0
ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
3.2
40316
315
0x13B
TEMPERATURE_CONFIGURATION bit 4
THIRD_POINT_ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
3.3
40307
306
0x132
TEMPERATURE_FILTER
Read &
Write
Memory
By default 60
sec
3.4
40304
303
0x12F
TEMPERATURE_OFFSET
Read &
Write
Memory
By default 0
9.4
Humidity (HUM)
Humidity Settings menu contains registers referring to humidity sensor display and humidity
control settings. User is able to switch on/off humidity sensor value display, set humidity
sensor filter or change humidity sensor offset. All available parameters are presented in the
table below:
Parameter
number
Modbus
address
Dec
addres
s
Hex
addres
s
Register Name
Access
Description
4.1
40317
316
0x13C
HUMIDITY_CONFIGURATION bit 0
ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
4.2
40317
316
0x13C
HUMIDITY_CONFIGURATION bit 4
THIRD_POINT_ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
4.3
40308
307
0x133
HUMIDITY_FILTER
Read &
Write
Memory
By default 60
sec
4.4
40305
304
0x130
HUMIDITY_OFFSET
Read &
Write
Memory
By default 0
