iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 53 / 121
9.6
Setpoint (SETP)
In the Setpoint Settings menu user has access to main setpoint registers. It is possible to
change locally from the Room Panel most useful Setpoint parameters, such as default
setpoint, low and high setpoint limit, setpoint STEP or offset range. User can also decide if
Setpoint value should be displayed in the Main Menu or if Setpoint or offset should be
changed during Setpoint Edition. All available parameters are presented in the table below:
Parameter
number
Modbus
address
Dec
address
Hex
address
Register Name
Access
Description
6.1
41513
1512 0x5E8
SETPOINT_CONFIGURATION bit 0
ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
6.2
41513
1512 0x5E8 SETPOINT_CONFIGURATION bit 1
EDITABLE
Read &
Write
Memory
0-inactive
1-active(def)
6.3
41513
1512 0x5E8 SETPOINT_CONFIGURATION bit 2
OPPERATING_MODE
Read &
Write
Memory
0-changing offset
1-changing setpoint(def)
6.4
41513
1512 0x5E8
SETPOINT_CONFIGURATION bit 3
SETPOINT_DISPLAY
Read &
Write
Memory
0-changing offset
1-changing effective setpoint(def)
6.5
41513
1512 0x5E8 SETPOINT_CONFIGURATION bit 4
THIRD_POINT_ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
6.6
41513
1512 0x5E8 SETPOINT_CONFIGURATION bit 5
FAST_EDIT_MODE
Read &
Write
Memory
0-inactive(def)
1-active
6.7
41503 1502 0x5DE
DEFAULT_SETPOINT
Read &
Write
Memory
By default 210
6.8
41505 1504 0x5E0
SETPOINT_LOW_LIMIT
Read &
Write
Memory
By default 180
6.9
41506 1505 0x5E1
SETPOINT_HIGH_LIMIT
Read &
Write
Memory
By default 240
6.10
41507 1506 0x5E2
OFFSET_RANGE
Read &
Write
Memory
By default 30
6.11
41508 1507 0x5E3
SETPOINT_STEP
Read &
Write
Memory
By default 10
