iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 5 / 121
1
Introduction
1.1
Revision history
Rev
Date
Description
1.0
28.08.2016
First edition
1.1
21.02.2017
The reason for creation of new version of the document:
New function:
•
Added SubmenuIconDisplayOFF bit in DeviceConfiguration register to
disable displaying of Submenu Icons;
Changes in Document:
•
Added SubmenuIconDisplayOFF bit description in DeviceConfiguration
section
•
Added description of Submenu Boolean All present Value registers
1.2
06.06.2017
Added information about BACnet MS/TP protocol
1.3
16.11.2017
Added new version of the Panel (iSMA-B-LP(-XX)-1)
Table 1 Revision history
1.2
Safety rules
Note: Incorrect wiring of this product can damage the product and lead to other hazards.
Make sure the product has been correctly wired before turning the power ON.
Before wiring or removing/mounting the product, be sure to turn the power OFF. Failure to
do so might cause an electric shock.
Do not touch electrically charged parts such as power terminals. Doing so might cause an
electric shock.
Do not disassemble the product. Doing so might cause an electric shock or faulty
operation.
Use the product within the operating ranges recommended in the specification (voltage,
shock, mounting direction, atmosphere etc.). Failure to do so might cause a fire or faulty
operation.
Firmly connect plugs to the terminals. Insufficient connection of the plugs might cause a
power failure and communication problems.
