Goodrive350-UL Series VFD
Basic operation instructions
-37-
No.
Name
Instruction
interfaces, eg switch over the
monitoring interface, shifting
the cursor rightward, enter
the next menu etc.
3
Display area
(12)
LCD
Display
screen
240×160 dot-matrix LCD;
display
three
monitoring
parameters or six sub-menu
items simultaneously
4
Others
(13)
RJ45
interface
RJ45
interface
RJ45 interface is used to
connect to the VFD.
(14)
Battery
cover
Clock battery
cover
Remove this cover when
replacing or installing clock
battery, and close the cover
after battery is installed
(15)
USB
terminal
mini USB
terminal
Mini USB terminal is used to
connect to the USB flash
drive through an adapter.
The LCD has different display areas, which displays different contents under different interfaces. The
figure below is the main interface of stop state.
01: GD350
16:02:35
Forward
Local
Ready
Set frequency
P17.00 Hz
50.00
DC bus voltage
P17.11 V
540.0
0x0000
About
Monitoring
Menu
Digital input terminal state
P17.12
A
B
C
D
E
F
Fig 5.2 Main interface of LCD
Area
Name
Displayed contents
Header A
Real-time display
area
Display the real-time; clock battery is not included; the time
needs to be reset when powering on the VFD
Header B
VFD running state
display area
Display the running state of the VFD:
1.
Display motor rotating direction: "Forward" – Run
forward during operation; Reverse – Run reversely during
operation; "Forbid" – Reverse running is forbidden;
2.
Display VFD running command channel: "Local" –
Keypad; "Terminal" – Terminal; "Remote" - Communication
