INVT CHV160, Operation Manuals

Page: 57 / 106

SHENZHEN INVT ELECTRIC CO., LTD. CHV160 Operation Manual
57
P5.33
AI4 upper limit
corresponding setting
-100.0% 100.0% -100.0 100.0 100.0%
P5.34
AI4 input filtering time
0.00s 10.00s 0.00 10.00 0.10s
AI2, AI3 and AI4 function settings are similar to AI1 setting method.
CHV inverter standard unit provides 2 paths of analog input port. Using AI3 and AI4 needs to
install multifunction I/O extension card.
Function
Code
Name Description
setting
range
Default
Value
P5.35
HDI1 high speed pulse input
function selection
0 4 0
P5.36
HDI2 high speed pulse input
function selection
0: setting input
1: counter input
2: length counter input
3: Reserved
4: Reserved
0 4 0
P5.35 and P3.36 respectively define high speed pulse input functions
0: setting input. Correspond to the setting of frequency, torque, PID assignment, and PID
feedback.
The settings coincidence relation is determined by function code P5.37-P5.46
1: counter input. Count pulse input
2: length counter input. Length count pulse input.
3-4: reserved
Function
Code
Name Description
setting
range
Default
Value
P5.37
HDI1 lower limit frequency
0.0 KHz
50.0KHz 0.0 50.0
0.0KHz
P5.38
HDI1 lower limit frequency
corresponding setting
-100.0%
100.0% -100.0
100.0
0.0%
P5.39
HDI1 upper limit frequency
0.0 KHz
50.0KHz 0.0 50.0
50.0KHz
P5.40
HDI1 upper limit frequency
corresponding setting
-100.0%
100.0% -100.0
100.0
100.0%
P5.41
HDI1 frequency input
filtering time
0.00s
10.00s 0.00
10.00
0.10s
P5.42
HDI2 lower limit frequency
0.0 KHz
50.0KHz 0.0 50.0
0.0KHz
P5.43
HDI2 lower limit frequency
corresponding setting
-100.0%
100.0% -100.0
100.0
0.0%
P5.44
HDI2 upper limit frequency
0.0 KHz
50.0KHz 0.0 50.0
50.0KHz
P5.45
HDI2 upper limit frequency
corresponding setting
-100.0%
100.0% -100.0
100.0
100.0%
P5.46
HDI2 frequency input
filtering time
0.00s
10.00s 0.00
10.00
0.10s
The ground of function codes defines the coincidence relation when pulse is used as the
setting input mode. These functions are similar to AI1 function.
P6. Output Terminal Group
CHV series inverter standard unit has one multifunction digital output terminal, two
multifunction relay output terminals, one HDO terminal (can be used as either high speed
pulse output terminal or open-collector output), and one multifunction analog output terminal. If
it is required to add more relay output terminal and analog output terminal, please install