SHENZHEN INVT ELECTRIC CO., LTD. CHV160 Operation Manual
34
speed pulse input 2 (HDI2), PLC and multi-speed stage number, actual count value, actual
length and some reserved parameters. Whether or not to display these parameters can be
decided by bit selection of Function Code P7.07 (converted into binary system), press
Button
/SHIFT to switch the display of the chosen parameter.
5.3.3 Motor Parameter Autotune
For details, please refer to the description of Function Code P0.17
5.3.4 Operation
Under running state, there are five running parameters: operating frequency, set
frequency, bus voltage, output voltage, output current, which are displayed permanently. Other
sixteen display parameters: output power, output torque, PID setting, PID feedback, on-off
input status, open collector output status, analog input AI1 voltage, analog input AI2 voltage,
analog input AI3 voltage, analog input AI4 voltage, high speed pulse input 1 (HDI1), high
speed pulse input 2 (HDI2), PLC and multi-speed stage number, actual count value, actual
length and some reserved parameters, whether or not to display can be decided by the bit
selection of Function Code P7.07 (converted into binary system), press Button
/SHIFT to
switch the display of the chosen parameter.
5.3.5 Fault
CHV series inverter provides a variety of fault information, which, for details, can be
referred to CHV series inverter faults and their countermeasures.
