18
OPERATION AND SET-UP ON THE CONTROLLER
inVENTer Connect controller platform | Operating instructions
3.2 Initial setup of the controller
Requirements:
• The controller and all devices relevant to the venti-
lation system are installed.
►
Establish the power supply for all devices in the
system.
The controller performs firmware and hardware
checks for the system. The LED flashes RED,
GREEN and BLUE during this process (1).
After a successful firmware and hardware check,
the LED lights up WHITE (2).
The controller changes to the radio channel setting.
Selecting the channel for the RF868-MHZ radio connection
Requirements:
• Firmware and hardware check successful.
The controller searches for the best radio channel,
the LED flashes alternately
GREEN and
TURQUOISE.
TIP:
There are 5 channels available.
We recommend using the automatically
assigned channel.
Different channels can be selected for
adjacent residential units.
The best radio channel is indicated on the control-
ler's display. The LED flashes alternately
GREEN
and TURQUOISE.
