14
OPERATION AND SET-UP ON THE CONTROLLER
inVENTer Connect controller platform | Operating instructions
3
Operation and set-up on the controller
3.1 General information
Easy Connect e16 controller
The ventilation system's central control unit is the Easy Connect e16 controller. It can be operated
directly or via the app.
The controller's user interface consists of 5 capacitive sensor keys. These are located on the front
of the programming unit. Operation is performed in conjunction with the displays on the display
screen (Liquid Crystal Display) by touching the various sensor keys.
Figure 6: Front view of the controller programming unit
The sensor keys
The capacitive sensor keys available on the programming unit can be used to make quick settings
for the ventilation system.
• Navigation keys
Use these keys to navigate and change values.
These keys are also used to set the time.
• Mode key
This key is used to switch between different user-specific settings or to
complete settings that have been made.
• Select key
This confirms the settings that have been made.
• Auto / Boost / Pause key
This key is used to set the ventilation modes Auto/Pause/Boost globally or
for each zone.
1 Display screen (LCD)
2 User interface (sensor keys)
3 Navigation key up/forwards
4 Navigation key down/backwards
5 Mode key
6 Select key
7 Auto / Pause / Boost key
8 Status display (LED, multi-coloured)
1
2
3
4
5
6
7 8
