inVENTer Connect inner cover Operating Instructions Manual Download Page 33

Page: 33 / 104

OPERATION AND SET-UP ON THE CONTROLLER

inVENTer Connect controller platform | Operating instructions

Setting the ventilation mode (operating mode, time-limited change)

The ventilation units operate in three ventilation modes with different ventilation levels. These

modes are:

Ventilation mode

Symbol

Heat recovery

Unidirectional ventilation

(both icons always act together)

OFF

Table 4: Ventilation modes (operating modes)

Requirements:

• The symbol for the ventilation mode set in the

ventilation profile flashes

(from the "System Information" screen:

Press the selection key 2 times).

►

Press the arrow keys and navigate

through the ventilation modes. The re-

spective selectable symbol flashes.

Once the desired ventilation mode is reached:

►

Press the selection key to move to the

next setting option. Your change is active.



The icon for the selected ventilation mode appears

on the display screen.



The next symbol (ventilation profile symbol) starts

flashing.

►

Press the mode key to exit the Settings

menu.

Your change is active.

The changed ventilation mode is effective for 1 hour

by default. This duration can be changed via the

app. The system then returns to the values stored

in the ventilation profile.

Summary of Contents for Connect inner cover









































































































Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands

inVENTer Connect inner cover, Operating Instructions Manual

Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands