inVENTer Connect inner cover Operating Instructions Manual Download Page 75

Page: 75 / 104

OPERATION AND SETUP WITH THE APP

inVENTer Connect controller platform | Operating instructions

Maintenance manager

Here you are shown how many months are left before general maintenance of all of the devices

integrated into the ventilation system needs to be carried out.

The factory setting for the maintenance interval of your ventilation units is 6 months.

Once the ventilation system has been set up, the app automatically counts the months remaining

until the scheduled maintenance.

►

Press the "Maintenance manager" button.



The adjacent window opens

and

displays the months remaining until the

scheduled maintenance.

TIP:

If you have carried out maintenance work off schedule or

for other reasons, you can reset this interval.

►

To do this, press the "Reset interval" button.



The adjacent window

opens, asking you to

confirm that unit

maintenance has been

carried out.

►

Press "OK" to confirm the

device maintenance or

"NO" to cancel.



After "OK", the remaining

time is reset and the speci-

fied interval (factory setting

or your personal setting)

starts again.

System update

Ventilation profile manager

Hours run meter

Ventilation levels

Boost and pause (cross-zone)

Filter manager

Maintenance manager

Radio Performance

Change system name

System reset

Restore factory settings

Advanced settings

Maintenance manager

Reset interval

Months remaining

Maintenance manager

Intervall zurücksetzen

Months remaining

Device maintenance carried out

Maintenance manager

Reset interval

Months remaining

Summary of Contents for Connect inner cover









































































































Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands

inVENTer Connect inner cover, Operating Instructions Manual

Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands