inVENTer Connect inner cover Operating Instructions Manual Download Page 83

Page: 83 / 104

OPERATION AND SETUP WITH THE APP

inVENTer Connect controller platform | Operating instructions

Setting the devices as a signal amplifier via the advanced settings

When setting up via the "Advanced settings" button, the devices are assigned manually,

i.e. the device that is to act as a signal amplifier can be defined by the user.



The starting point is the "Advanced settings" menu in the app.

►

Press the "Radio Performance" button.



The adjacent window opens and shows the signal strength

for each device:

• Green

: good signal strength (> -80 dB),

Device is already being used as a repeater ( symbol ),

or can be used as a repeater

• Yellow

: poor signal strength / no signal (< -80 dB):

signal amplification for the device in question is recom

mended (define repeater via the "Device overview" menu).

►

Press the "Use as Repeater" button of the component that is

to be set up as a signal amplifier in the system, e.g. Device 4.



The selected system component is used as a signal amplifier

(repeater).



Next to the component set as a repeater, the symbol is

displayed to indicate that the device is acting as a signal

amplifier.

Within a controller system, several devices can be set as

signal amplifiers (repeaters). The corresponding icon appears

next to each device specified as a signal amplifier.

We recommend keeping the number of repeaters in the

system low.

System update

Ventilation profile manager

Hours run meter

Ventilation levels

Boost and pause (cross-zone)

Filter manager

Maintenance manager

Radio Performance

Change system name

System reset

Restore factory settings

Advanced settings

Use as repeater

Device 2

Device 4

Fan 1

Device 3

Device 6

Device 5

Signal strength: -36 dB

Signal strength: -93 dB

Signal strength: -86 dB

Signal strength: -36 dB

Radio Performance

Use as repeater

Device 2

Device 4

Fan 1

Device 3

Device 6

Device 5

Signal strength: -36 dB

Signal strength: -45 dB

Signal strength: -86 dB

Signal strength: -36 dB

Radio Performance

Summary of Contents for Connect inner cover









































































































Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands

inVENTer Connect inner cover, Operating Instructions Manual

Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands