inVENTer Connect inner cover Operating Instructions Manual Download Page 41

Page: 41 / 104

OPERATION AND SET-UP ON THE CONTROLLER

inVENTer Connect controller platform | Operating instructions



On the display screen, the pause symbol flashes

and at the same time the pause function time

setting (timer) appears.

►

Press the up and down arrow keys to set

the desired time for pause mode.

When setting the pause time, you can choose

between 1, 2, 4 and 8 hours.

►

Press the select key to confirm the

selected time setting.



The desired pause time is set for the selected

ventilation zone,

here e.g. 4 hours.



The display screen shows the zone

status (system information) for the ventilation zone

that is in pause function, here ventilation zone 2.



Alternating with the zone status, the remaining

pause time is displayed.

The set pause time is displayed alternately with the

zone status until it expires.

↔↔

Summary of Contents for Connect inner cover









































































































Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands

inVENTer Connect inner cover, Operating Instructions Manual

Search results

Summary of Contents for Connect inner cover

Reviews:

Related manuals for Connect inner cover

Brands by name

Popular brands