Intermec 6950 EGS, User Manual

Page: 17 / 144

6950 Enterprise Gateway Server User’s Guide 3-1
Section 3
Installation
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
You must successfully establish two connections with the
6950 EGS after it powers up Ċ one to the wireless
equipment and one to the host. The 6950 EGS supports
communication from wireless stations to multiple host
applications. To establish connections, do the following:
"
Connect the Ethernet port on your 6950 EGS to the
network.
"
Connect other network devices as follows:
"
Connect a 2100 UAP, 6710 Access Point, or
RB4030 Base Radio through a direct connection
to the Ethernet network. These devices do not
require a controller.
"
Connect an RCB4030 Base/Controller, RC4030E
Gateway, or RC3250 Network Controller through
an RSĆ232 serial connection to the 6950 EGS.
An RB4030 Base Radio or RB3000 Base Station
directly connects to the controller.
This section describes some different configurations for the
6950 EGS and then shows how to install each one.