Intermec 6950 EGS, User Manual

Page: 82 / 144

SECTION 6 Configuring Radio Frequency Communication
6-8 6950 Enterprise Gateway Server User’s Guide
Option Name Function
1 Type Displays the type of network setting:
E = Ethernet (default)
R = RSĆ232 serial communication
4 Rec
(NonĆTelnet
VT220 terminal
emulation only)
Reconnect: Controls whether the 6950 EGS
reattaches to the previous session after a wireless
station has been powered off then on.
NOTE: The
wireless station’s display does not refresh after
reconnection.
Settings:
0 = off (default)
1 = on
5 Auto
(NonĆTelnet
VT220 terminal
emulation only)
Automatic login: Controls whether the 6950 EGS
automatically attempts to telnet to the host defined
for RF Unit Setup (described on page 5Ć25). Settings:
0 = off (default)
1 = on
6 Dbg Debug: Verbosity level (detail kept in the log file).
See details for the log file in Section 8, Monitoring
the System." Settings:
0 = silent
(default) Ċ Reports no debug information
during normal operation. Leave Debug in this mode
unless otherwise instructed by our personnel.
1 = normal Ċ Shows wireless station powerĆup and
connection information.
2 = debug Ċ Shows detailed messages in and out of
the 6950 EGS, plus information contained in
normal" mode.
"
NOTE: Under normal conditions use debug level
zero, since the additional activity at the
other two log levels degrades performance.