Intermec 6950 EGS, User Manual

Page: 110 / 144

SECTION 8 Monitoring the System
8-14 6950 Enterprise Gateway Server User’s Guide
Precise syntax for debug messages varies with they type of
terminal emulation and Ethernet connection, but the
sample shows the detail to expect at debug level 2.
Abnormal Conditions
The examples on the other pages show normal conditions.
Abnormal conditions show more information that may help
locate the source of the problem. If the logs and debug
information are not enough to isolate the problem, call your
Intermec representative or the Customer Response Center.
Have documentation of your software maintenance
agreement available, or a purchase order for support.
The following example shows the 6950 EGS having
difficulty finding a root access point on the network.
<date><time>
: Initiated socket 0
<date><time>
: Initiated socket 1
<date><time>
: Initiated socket 2
<date><time>
: Initiated socket 3
<date><time>
: Initiated socket 4
<date><time>
: Initiated socket 5
<date><time>
: Initiated socket 6
<date><time>
: Initiated socket 7
<date><time>
Norand SST/OWL protocol interface Version
<version>
<date><time>
Trying to locate access points
…
<date><time>
./nui_eth: Connecting server id 0.
<date><time>
Trying to locate access point
…
<date><time>
Trying to locate access point
…
<date><time>
Trying to locate access point
…
!
The 6950 EGS logs this message about every 15 seconds
until a root access point is located on the network.