Intermec 6950 EGS, User Manual

Page: 58 / 144

SECTION 5 Configuring Network Options
5-14 6950 Enterprise Gateway Server User’s Guide
Type the gateway address for the static route. This is
usually the address of the router (for example,
136.179.76.3"). Be sure to use the IP address on the
side of the router with the RF equipment. In
Figure 5Ć2 on page 5Ć12, the connection is marked
local IP."
Press [Enter] after typing the address. The following
screen appears:
Enter Static
Route Netmask:
–>
Type the subnet mask for the static route and press
[Enter]. The subnet mask must give the 6950 EGS
access to the default host. This completes the static
route.
"
NOTE: After you complete setup and reboot the 6950 EGS, you can
check the static route by pinging the host from the 6950 EGS.
The host can check the return path by pinging the 6950 EGS.
The following screen appears after you enter the
netmask: